Showing posts with label Outdoor. Show all posts
Showing posts with label Outdoor. Show all posts

Tuesday, August 23, 2011

RC Helicopter Frequently Asked Questions

RC Helicopter Frequently Asked Questions

Rc Helicopter

Newbie RC helicopter owners always ask lots of questions about their new toys, so I compiled this list of frequently asked questions for you RC helicopters! This should be a list of frequently asked questions answered almost all RC helicopters problems or concerns and help you find the best RC helicopter flying experience, hope that we can!

It 'hard to build a remote controlled helicopter?

The short answer is yes and no. If you are building yourHelicopter, you must assemble the pieces to make the helicopter, and the measurement set of connections and make sure everything is correct. There is usually no special effort, such as sandblasting, cutting or gluing, and if you are willing to be patient and follow the instructions that come with it, you can use your RC helicopter in only a handful of gigs assembled and ready to flying in no time.

They do not cost a lot?

It all depends on what kind of helicoptersand the necessary equipment with him. The cost of a basic setup between $ 0.30 550 - $ 750, while a turbine or a large electric RC helicopter can cost $ 5,000 0.90 setup, $ 10,000 or more. It all depends on what you want.

How fast can it fly?

The basic settings can reach 40-60 mph straight and level flight as top speed. Some RC helicopters that have been modified for racing known to reach speeds of 100 mph or more.

Aredifficult to fly?

In short, yes. In fact, they are known to experience the most difficult remote-controlled vehicles to control, but you can not go trying to learn to fly one. Anyone who has the determination and perseverance can learn to fly one. If you want to fly one just for the heck of it, then you will be able to do so much sooner than if you try to fly complicated flips and other maneuvers. The key is to only have fun with the learning experienceand the rest will come with time.

It takes time to learn to fly one?

Again, it all depends on what you want from this experience. Most people are able to base floats within a month or two to complete the practice 3-4 nights a week. Within 3 to 6 months, should be able to handle forward flight and turns the base. It could be a year or more to learn loops, rolls, inverted flight and other complicated maneuvers. Depends only on the wheel, your interests, such asAs you practice and your desire to learn, like everyone else.

RC Helicopters are dangerous?

They can be very dangerous, really. You might not think of it as a big threat at first sight, but the truth is that if the helicopter is running, the leaves are spinning close to 300 mph. If they hit someone or something were affected, could cause a lot of damage or even death. Always be sure to fly at a safe distance from people, cars, buildings, roads, etc. to prevent injuriesTo avoid personal injury and damage to your helicopter.

eeyore wall stickers samsung ice maker imc701 panasonic dvd-ls86 portable dvd player

Wednesday, August 17, 2011

Air Hogs Havoc Heli and Shogun: Indoor & Outdoor Flight Pack

Air Hogs Havoc Heli and Shogun: Indoor & Outdoor Flight Pack Review




Availibility : Usually ships in 1-2 business days



Air Hogs Havoc Heli and Shogun: Indoor & Outdoor Flight Pack Feature

  • Fly Outdoors with Quick Charge... or take it inside with Havoc Heli
  • Air Hogs Quick Charge are the smallest flying motorized planes ever!
  • Propeller spins and motor revs to indicate plane is charging
  • Fully chared in 10 seconds
  • Requires 6 x AA batteries (not included)

Air Hogs Havoc Heli and Shogun: Indoor & Outdoor Flight Pack Overview

Includes Air Hogs R/C Havoc Heli and Red Shogun.

canon waterproof camera d10 Lixit Water Bottle

Thursday, July 7, 2011

RC Helicopter Blade monitoring

RC Helicopter Blade tracking is a mystery, many new RC helicopter owners were, but I'm going to demystify the concept to you at this time in order to have a complete understanding of the track at the moment if they have read this article.

First, we need to answer this important question: What is the monitoring of the blades?

Rc Helicopter

In essence, trail running, when a rotor blade rotates in a circular motion and the blade follows closely behind. Both bladesSpin on the same level, without a leaf blade is higher or lower, is after. Another way of looking at things is that both blades travel through the same air space created by their rotation. If the rear blade is after the forerunner to a higher or lower level, can lead to many unwanted vibrations for the RC helicopter.

How to Follow Your Blades

If you fly your RC Helicopter is the first time, you have to see if the blades are tracking correctly andYou may need a little help from an experienced RC helicopter pilot. You can run the track in place by simply hovering the helicopter at eye level and watch the leaves that float to verify. If you see a lot of shaking and vibrating, your RC helicopter is more than likely not correctly registered. If you are not sure whether to do this properly monitoring:

Get two different colors of tape and apply a small strip of a color to a blade. Put a red stripe on one side and a blue stripe on the otherBlade. Using a different color on each sheet, making it much easier to see what is perhaps the path of the blade.

Now that you have placed a colored ribbon sticker, an experienced helicopter pilots RC helicopter hover in place so you can see the blades as they spin. As you can see the rotating blades, you know, if they are on the right track, even if only a single course or both of the rotating blades of a line. If you have two circles or two lines (red to blue or vice versa) to see, then you know thatone of the sheets are cut off and must be adjusted.

In order to monitor the cutting blades, you must first RC helicopter country in the balance. They stopped after cutting in turn, you can use the blade that is out of alignment. It is necessary that the RC helicopter manual at hand so you can see the correct blade tracking information in it. Be sure to adjust the right contacts in what is in the manual and not what someone says. This is the best way to be sure that youdone correctly.

Once you tighten or loosen the right connection or connections, you must have someone to fly the helicopter and make sure you look at the blades. Repeat this as many times as necessary until the leaves verfolgt properly and rotate on the same floor. Once you run the right lane is closed, the control RC helicopter is much smoother than before and much easier to fly.

RC Helicopter Blade monitoring

whole house surge protector review smartstick? hand blender

Friday, June 10, 2011

3-Ch Metal Frame Outdoor RC Helicopter Alloy Shark S006

3-Ch Metal Frame Outdoor RC Helicopter Alloy Shark S006 Review


3-Ch Metal Frame Outdoor RC Helicopter Alloy Shark S006 Feature

  • great gift
  • super awesome model
  • loads of fun
  • free extra li-poly battery
  • 2 free extra blades (blade a & b)

3-Ch Metal Frame Outdoor RC Helicopter Alloy Shark S006 Overview

?Function: Up/Down, Left/Right, Forward/Backward ?Product is 100% new, never used ?FULLY ASSEMBLED, READY TO FLY ?Flight Time: 8-9 minutes ?Controller Type: A pole square ?Battery for controller: load 8"AA" batteries ?Battery: Li-Poly 3.7v 1000mAh ?Metal Frame ?Product size: 37.5*14*17.5 cm ?Box size: 63*23*11 (cm) ?Charge time: about 1 hours ?Aviate Time: 8-9 minutes ?Aviate Height: 20-30m ?Aviate Area: 20-30m ?Frequency: 27mhz / 40mhz / 49mhz ?1 x Helicopter ?1 x Remote Controller ?1 x Spare tail propeller ?1 x Instruction Manual ?1 x Charger ?1 x Sscrewdriver

Available at Amazon


scarecrow motion sprinkler flint fire starters